|
1 |
A-type
Wrist Turn Unit |
1 |
AB,
D-Type Wrist Turn Unit |
| 2 |
Parts
vacuum circuit with detection |
2 |
Volume
Up to vacuum 2 systems |
| 3 |
Parts
gripper with detection |
3 |
Vacuum
Circuit for parts Side Runner |
| 4 |
Wrist
trn sequence control |
4 |
Check
Pivot and Its Potion Setup |
| 5 |
Parts/Runner
Rejecting of Priority, Vertically Setup |
5 |
Parts
Unload 2 Positions (with Vertical Shift) |
| 6 |
Runner
Release At Midway of Traverse Forward/Backward |
6 |
Traverse
Beam Degater (4 Positions/Cycle) |
| 7 |
Palletizing
(999 positions) or Shift Palletizing and Direction |
7 |
Traverse
Beam degating Direction Setup (All Axis) |
| 8 |
Intermediate
Traverse Wait Position (Rack Mold Capable) |
8 |
Cut
Inside Chuck at Unloading or On the Way Position |
| 9 |
Teaching
Data Check Function |
9 |
Chuck
Pitch Adjustment |
| 10 |
Primary
Rejection, NG and Overflow Rejection |
10 |
Under
Cut Release by Air Cylinder |
| 11 |
Molding
Shutdown Mode after Consecutive NG Signal |
11 |
Parts
vacuum Circuit Multi-System |
| 12 |
Vertical
Arm Stay and Wait at Proximity to Mold Halt Position |
12 |
Blower
Specification |
| 13 |
Optimize
curved Approach on Arm Movement |
13 |
Vacuum
Release Circuit - Air Blow |
| 14 |
Mold
Data, File Name Comments Saved Memory |
14 |
Unload
Parts after a tentative Storage |
| 15 |
Alarm
History Reporting (with time of occurred display) |
15 |
Throw
in Partitions Movement |
| 16 |
Maintenance
Records and Requirement with Alarm Notice |
16 |
Mold
Insert (with insert and Parts Take-Out Movement) |
| 17 |
Teach
Positioning On the Fly in Auto Operation (max +/-3mm) |
17 |
Hinge
Bending, Lid Closing |
| 18 |
Power
Save Operation, Servo Power OFF |
18 |
Interlock
with Molding machine Cores Remove |
| 19 |
Sampling
Mode |
19 |
Unattended
Operation |
| 20 |
Production
Control Mode |
20 |
Halt
inside Mold When Extracting Error |
